 |
| Installed components on the board & practiced soldering |
 |
| My Tool Kit |
1. Set iron to 700°F
2. Set part in place on PCB
3. Heat both the pad & lead
4. Feed solder under the tip
5. Hold it until solder flows on the pad and around the lead
Wednesday, January 9, 2013
01: Intro to Soldering and making 5V power supply
1. Set iron to 700°F
2. Set part in place on PCB
3. Heat both the pad & lead
4. Feed solder under the tip
5. Hold it until solder flows on the pad and around the lead
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment